Flat Steel Bar

Width of 10-500mm, a thickness of 3-60mm, a rectangular cross-section, and slightly blunt edges. 

It can be used as a billet for welded pipes and a thin slab for laminating thin plates.

Width	10mm-500mm
Length	2m, 5.8m, 6m, or as required.
Thickness	3mm-60mm
Tolerance	±1%
Alloy Or Not	Non-Alloy
Standard	ASTM A479,ASTM A276,ASTM A484, ASTM A582, ASME SA276, ASME SA484, GB/T1220, GB4226, etc.
Material	301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202, 321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200,S30100, S30400,S30403, S30908, S31008, S31600, S31635,
Surface	Black, peeled, polishing, bright, sand blast, hair line, etc.

Advantage of Flat Steel Bar

The smoothness of the product surface. The secondary use of high-pressure water descaling process in the process ensures a smooth surface of the steel.
The sides are vertical and the water chestnuts are clear. The secondary vertical rolling in the precision rolling ensures good verticality, clear corners, and good surface quality of both sides.
The scale of the product is precise, with a three-point difference, and the same level difference is better than the steel plate standard; The product is flat and the board shape is good.
The precision rolling process adopts continuous rolling technology and automatic loop control to ensure that there is no stacking or pulling of steel. The product has high dimensional accuracy, with better tolerance range, three-point difference, same strip difference, sickle bending and other parameters than the medium plate, and good straightness of the plate shape. Cold cutting with high precision in length measurement.